What Are the Steps for Installing BMW G22 M Performance Style Carbon Fibre Exhaust Tips?

Turn your BMW G22 into a work of art with the glossy M performance carbon fibre exhaust tips. These bad boys not only level up the looks of your car but also gives a unique upgradation in performance as their lightweight construction makes for a better drive.

Read our step by step guide to install these exhaust tips and experience it for yourself the magic of this upgrade. Get ready to turn heads and enjoy the ride with every rev of your engine.

What is a M Performance Carbon Fibre Exhaust Tip?

An M performance carbon fibre exhaust tip is a special accessory for BMW cars. These exhaust tips are a style upgrade for your car. They are made from carbon fiber, a material that is strong and light. So they not only make your car look sporty but also make it move more efficiently.

Carbon fiber is popular in the automotive world because it can withstand high temperatures and doesn’t add much weight to the car. This makes it perfect for exhaust systems that need to handle heat from the engine. When you install these tips, you get a sleek and modern finish for your BMW and you might feel a slight improvement in your car’s movement.

The M Performance parts are made with accuracy and care so they fit perfectly with your BMW. These exhaust tips are no exception; they blend in with your car’s design and adds an extra layer of style and performance. By choosing them you are not just upgrading your car, you are investing in quality and style that will last.

What Does An Exhaust Tip Do?

Exhaust tip is the part of the exhaust system that you can see at the back of the car. On the BMW G22, this tip doesn’t just look cool; it has some work to do. First it directs the exhaust gases away from the car. This is good because it keeps the car’s underbody clean and reduces the chance of fumes coming back into the car.

The exhaust tip can also change the sound of your car. Some tips are designed to make the engine roar a bit more, giving your BMW a sportier sound. Others keep it quiet. While the exhaust tip itself doesn’t make the car go faster or more fuel efficient, it can make the sound of your car stand out, adds to the overall driving experience.

What Tools & Materials are Needed to Install The Exhaust Tips?

To install M performance carbon fibre exhaust Tip on your BMW G22 you need some basic tools and materials. Here’s a simple list to get you started:

1. Wrench Set: You’ll need a wrench to loosen and tighten the bolts that hold the exhaust tips in place. Make sure to have different sizes available to fit the bolt sizes.
2. Screwdriver: A flat-head or Phillips screwdriver can come in handy if your exhaust tips have screws that need adjusting or securing.
3. Lubricant: Use a spray lubricant like WD-40 to loosen any rusted or stubborn bolts. This makes it easier to remove the old exhaust tips and install the new ones.
4. Rag or Cloth: Keep a rag nearby to clean the exhaust pipe and the new tips before installation. This ensures a good fit and prevents any dirt from causing issues.
5. Gloves: Wearing gloves protects your hands from sharp edges and heat, especially if you are working on a recently used vehicle.

These tools and materials will help you install the exhaust tips smoothly. Make sure your car is cool and safely elevated before starting the installation. This will make it safe and easy to work.

What are the Steps for Installing BMW G22 M Performance Carbon Fibre Exhaust Tips?

To ensure a smooth and successful process of installing BMW G22 M performance style carbon fibre exhaust tips, follow these steps:-

Step 1: Remove the Original Exhaust Tips

• Inspect and Loosen: Check the original exhaust tips and locate the screws or clamps that hold them in place. Use a socket wrench or screwdriver to start loosening them.
• Apply Lubricant: Spray WD-40 or similar lubricant on the connection points to make removal easier.
• Remove the Tips: Gently tap the old exhaust tips with a rubber mallet if they’re stuck. Pull them off once they’re loose.

Step 2: Prepare for Installation

• Clean the Exhaust Pipe: Use a cloth to wipe away any residue or rust from the exhaust pipe. Make sure the surface is clean for the new tips.
• Check the New Tips: Check the BMW G22 M Performance style carbon fibre exhaust tips for any manufacturing defects. Make sure the tips fit your exhaust pipe.

Step 3: Install the New Carbon Fibre Exhaust Tips

• Align the Tips: Slide the carbon fibre exhaust tips onto the exhaust pipe, make sure they are aligned.
• Secure the Tips: Tighten the screws or clamps with a socket wrench. Make sure they are tight but not over tightened which can damage the carbon fiber.
• Check Alignment: Make sure both exhaust tips are even and symmetrical for a perfect look.

Step 4: Final Inspection and Testing

• Check the Installation: Double check all connections and alignment. Make sure everything is tight and even.
• Test Run: Start your BMW G22 and listen for any rattling or unusual noise. Make adjustments if needed.

What are the Tips for a Successful Installation?

To install M Performance Carbon Fibre Exhaust Tips on your BMW G22 successfully follow these tips:

1. Prepare Your Tools: Before you start, make sure all your tools are ready. This includes socket wrench, screwdriver, car jack, clamps and sealant if needed.
2. Check the Fit: Before installing, test the exhaust tips on the pipe to make sure they fit. This will avoid any surprises during installation.
3. Read the Instructions: Read the instructions provided with the exhaust tips. Reading before hand will prevent mistakes.
4. Safety First: Work on a flat surface and use the parking brake. Make sure the car is cool before starting and use the car jack safely.
5. Take Your Time: Don’t rush the installation. Take your time and do each step correctly to avoid problems later.
6. Double Check: After installation check all bolts and clamps are tight. Make sure the tips are secure and aligned.
7. Listen and Observe: Once installed, start your car and listen for any unusual sound. Check that the exhaust tips look and perform as expected.

Follow these tips and you’ll have a smooth installation and a great looking and sounding BMW G22!

When should the BMW G22 Exhaust System be Cleaned & How?

To keep your BMW G22 M performance carbon fibre exhaust tips looking good and working well, clean them every few months or whenever they look dirty. Here’s how to clean them:

Here’s how to clean the exhaust tips:

1. Prepare Your Materials: You’ll need a soft cloth, mild soap, water and a bucket. Avoid using harsh chemicals as they can damage the carbon fiber.
2. Rinse: Use water to rinse off any loose dirt or grime from the exhaust tips.
3. Wash: Mix mild soap with water in the bucket. Dip the soft cloth into the soapy water and gently scrub the tips. Be careful not to scratch the surface.
4. Rinse: After washing, rinse the exhaust tips thoroughly with clean water to remove any soap residue.
5. Dry: Use a dry, soft cloth to wipe the exhaust tips. Make sure they are dry to prevent water spot.

Cleaning regularly will keep your exhaust tips looking good and can prevent build up that might affect their performance. A little maintenance goes a long way to keep your BMW G22 looking and running great.

Bottom Line:

In summary, installing BMW G22 M performance style carbon fibre exhaust tips will not only make it look good but also better. Follow the installation steps and tips above and you will have a smooth installation. Cleaning and installation will keep your exhaust tips looking sharp and working well, so you can enjoy the style and sound of your car. Get this upgrade and turn heads wherever you go.